Ứng dụng của hệ thống PCCC deluge : ■ Các hệ thống tự động phun nước dạng sương mù hoặc bọt khí - Automatic spray or foam systems ■ Hệ thống màn nước bao phủ - Water curtain systems ■ Các trung tâm mua sắm và các tòa nhà cao tầng - Shopping centers & public buildings ■ Các kho chứa ga, khí hóa lỏng LPC và các vật liệu dễ bắt lửa - Flammable materials & gas storage ■ Hệ thống đường hầm và tàu điện ngầm dưới lòng đất - Roads & rail tunnels ■ Các trạm điện và trạm biến thế - Power plants & transformers ■ Các nhà ga sân bay, bến cảng - Aviation & airports ■ Những nơi chứa các loại hóa chất xăng dầu - Petrochemical facilities,.. How a deluge valve system works?1. Manually
2. Electrically (Fire Detectors)
3. Pheumatically (Glass Bulb Detectors)
4. Hydraulically (Glass Bulb Detectors)
- Each of these methodes (2 3 4) has a fire detection line that can activate the deluge valve
- Once the Detector operates the deluge valve will be activated, releasing (opening) the water supply to the system.
- Autommatic Fire Pumps can be activated by this proceedure and inturn extinguish/control the fire condition. Deluge Valve Sprinkler Systems:
The Deluge system is designed to protect high hazard areas containing a severe fuel hazard with a high heat release rate by bringing a large number of open sprayers into action simultaneously in the event of a fire.
The most common approach of detecting a fire is the use of a sprinkler detection line permanently charged by air. In the event of a fire, the sprinkler detector heads directly affected by the fire will operate. The immediate drop in air pressure within the detector line releases the pressure against the Deluge valve diaphragm unit causing the Deluge Valve to open and discharge water through all the open water spray nozzles to rapidly control and extinguish the fire. The fire fighting properties of the Deluge valve system can be considerable enhanced with the introduction of foam solution into the systems water supply. Enhanced foam Deluge systems are ideal for the protection of hazards such as the storage and handling of flammable liquids in aircraft hangars, oil refineries and chemical plants etc. A typical Deluge valve system comprises of a control valve, a sprinkler operated detection system and a dedicated water supply system. For small or confined high hazard risk areas, Multiple Controls can be used instead of sprinklers. The Multiple Control is a distribution valve containing its own detection element. When this element is triggered, it supplies water to a small number of nozzles located within its zone of protection. They are available in 20, 25, 32 40 or 50mm sizes. The size of the Deluge valve, its flow rate, the system water supply pressure and type of detection system are all determined by the size and type of fire risk involved. |